Your cart (0)
Your cart is empty
Tax included and shipping calculated at checkout
Your cart is empty
Tax included and shipping calculated at checkout
One dial, four hoses and a practical way to manage four tyres together
A tyre pressure gauge needs to give a clear, consistent reading at the pressures used on and off road. Small differences become more significant at reduced pressure, particularly on sand and rough tracks. The Clearview Tyre Spider connects four tyres to one manifold and dial gauge, allowing their pressure to be read and reduced together instead of checking each wheel separately.
Clearview Tyre Spider. This multi-tyre manifold gauge uses a four-hose manifold and single dial gauge to read and deflate four connected tyres together. The current product description specifies brass and stainless fittings, professional-grade hose and a compact supplied case.
Three things matter when selecting a tyre pressure gauge for off-road use: measurement, workflow and construction.
Measurement: Clearview states that the dial gauge is rated to ±0.5 psi at its target operating pressure. This is a manufacturer performance claim and should be checked against the current product documentation. A consistent gauge is particularly useful when matching pressures across an axle or all four wheels.
Workflow: Connecting all four hoses lets the tyres deflate in parallel. One dial shows the shared pressure, so there is no need to move a single deflator from wheel to wheel. Actual deflation time will vary with starting pressure, target pressure, valves, tyres and conditions.
Construction: The product description specifies brass and stainless fittings rather than an all-plastic manifold. The supplied case helps keep the hoses, fittings and gauge together when the system is stored in a vehicle.
Connect each hose coupling to a valve stem, then open the central valve to release pressure from the connected tyres. Watch the single dial and close the valve at the selected pressure before disconnecting the hoses. This shared-manifold arrangement helps bring the four tyres to a consistent reading without repeating the full process at every wheel.
The manifold can also be used for an individual pressure check. Connect one hose to the valve stem and read the dial without opening the deflation valve. It is still good practice to check the spare and inspect the valve stems before a trip.
The correct pressure depends on the vehicle, tyre construction, load, speed and terrain. Generic pressure ranges should not replace the vehicle handbook, tyre manufacturer guidance or vehicle-specific advice.
Record settings that work for the vehicle under known loads. That gives the tyre gauge kit a repeatable purpose rather than turning each pressure change into guesswork.
Clearview is represented in this collection by the Clearview Tyre Spider. It is a manifold-style product, not a conventional digital tyre gauge or pocket gauge. The Clearview tyre gauge layout is intended for owners who regularly adjust all four tyres and want one shared reading.
For alternative formats across the wider Ultimate Offroad range, use the tyre deflators and gauges collection. That broader store category may include products from Staun, MAXTRAX, ARB, Bushranger and other vendors.
Start with a stated accuracy relevant to the pressure range you use. Decide whether a single-wheel gauge, digital tyre gauge or multi-hose manifold suits your workflow. A compact handheld unit is convenient for occasional checks. A manifold can make more sense when all four tyres are adjusted regularly.
Check hose length, valve connections, gauge readability, material specifications and storage. TPMS compatibility should also be confirmed where sensors or pass-through valve arrangements are fitted. No gauge compensates for damaged valves, unsuitable tyre pressures or failure to reinflate before returning to sealed roads.
A tyre pressure gauge does not normally require workshop fitting. If it forms part of a broader tyre management setup with a compressor, repair equipment or TPMS, our Ferntree Gully and Pakenham workshops can help assess the vehicle and quote a suitable package. If you are not sure, reach out to our friendly staff.
Submit a service enquiry with your vehicle details, or email sales@ultimateoffroad.com.au, and our friendly staff will confirm fitment, quote the work and arrange a booking at Ferntree Gully or Pakenham.
Workshop & fitting
Our workshop team can help you choose the right gear and fit it to your 4WD, at Ferntree Gully or Pakenham.
Accredited by
Our team provides professional guidance to help you choose the right parts confidently.